EMC laboratory
The EMC laboratory at Baudisch Electronic
Baudisch Electronic’s EMC laboratory has selected laboratory equipment that is regularly certified in accordance with ISO 9001. Our devices are strictly monitored and sourced exclusively from renowned brands. In this way, we guarantee a high-quality and accurate EMC measurement so that our customers can bring a reliable and safe product onto the market.
The highly qualified staff of the EMC laboratory with years of experience are available to our customers at all times. If tests are not passed, we define ways to rectify the fault, actively work on the circuit board and housing design and implement the measures directly on site in the laboratory. In addition, our customers regularly receive product-relevant information on new standards, changes to EMC legislation and amendments to EU directives.
In addition to measurements in the EMC laboratory, we can also carry out measurements on your premises with our mobile measuring equipment on request.
EMF measurements for risk assessment of electromagnetic fields
We also offer EMF measurements for risk assessment in the event of exposure to electromagnetic fields. Our experts are certified in accordance with DGUV principle 303-006 and are authorized to carry out the necessary measurements, calculations and risk assessments. This complements our comprehensive range of services and ensures that you can comply with all relevant safety standards.
Josip Horvat
Head of EMC Laboratory
josip.horvat@baudisch.de
+49 (7172) 9 26 13-33
Carsten Hampel
EMC & EMF expert
carsten.hampel@baudisch.de
+49 (7172) 9 26 13-34
Opening hours:
Monday – Friday
07.00 – 15.45
Downloads
⯈ Price list PDF
EMC requirements profile PDF
Note:
This form can also be used for
requests for EMF measurements or RED tests!
What is EMC?
EMC (=electromagnetic compatibility) is an important quality feature of electronic products. To ensure the optimum functionality of a product, it must be resistant to external interference and at the same time not interfere with the function of other devices. For approval on the market, the manufacturer must ensure compliance with EMC standards and directives.
No interference from other devices
An electrical device must be resistant to electromagnetic interference to a certain degree in its intended environment of use.
No interference from other devices
An electrical device must not influence other devices by emitting interference. To this end, specified emission limits must be observed.
EMC laboratory services
Services of the EMC laboratory at a glance
- Metrological testing of EMC conformity
- Troubleshooting and rectification of deviations
- Preparation of reports on audits carried out
- Advice on EMC-compliant development & EMC-compliant design
- Support with the preparation of EU declarations of conformity
- Training on the subject of EMC
- Analysis and measurement on your premises
- EMF measurements
- Measurements for the RED Directive
- Optimization of circuit designs
- Positioning of components on the printed circuit board
- Suggestions for an EMC-compliant layer structure and corresponding conductor routing
- Shielding | Ground routing
- Cabling | Wiring | Optimized filtering
- Individual determination of standards and legal requirements
- Determination of the test setup and any auxiliary devices
- Documentation as a basis for various certifications and for the reproducibility of measurements
- CE consulting (Dekra certified)
- Advice on standards, laws and EU directives for electronic devices
EMC laboratory: Legal basis
EMC Directive 2014/30/EU
- EMC Act (EMVG)
- International standards (IEC)
EN and IEC standards
- Measurement according to NAMUR
- Customer-specific requirements
Laboratory equipment
The EMC laboratory is equipped with a large full-absorber hall, various antennas and modern measuring equipment.
EMC tests
EMC tests for the interference immunity and interference emission of test specimens – in our laboratory and at the customer’s premises.
EMF measurements
Measurements of electromagnetic fields, definition of protective measures and documentation.
RED Directive
We carry out the necessary follow-up measurements and provide information on the necessary verification.
EMC expert forum
Members of the EMC Expert Forum exchange ideas on the subject of EMC at regular events.
REQUEST FOR EMV SERVICE
Please send us a non-binding inquiry using the contact form or return the completed EMC requirements profile to us. We look forward to hearing from you and will contact you as soon as possible.
Contact form
Your contact persons:
Josip Horvat
Head of EMC Laboratory
josip.horvat@baudisch.de
+49 (7172) 9 26 13-33
Carsten Hampel
EMC expert
carsten.hampel@baudisch.de
+49 (7172) 9 26 13-34
Opening hours:
Monday – Friday
07.00 – 15.45
Downloads
⯈ Price list PDF
EMC requirements profile PDF
Note:
This form can also be used for
requests for EMF measurements or RED tests.